-
Call us on +49 (0) 28 31 / 134 998-0
-
Opening hours 08:00 - 16:30; Fri 08:00 - 15:00
-
Email us at: info@thoelen-pumpen.de
Cased Pumps
Lagopredos® TP 1000 E – Economic
- Speed setting via potentiometer
- Standard version with stepper motor up to 300 rpm
- Stepper motor with up to 400 rpm on request
- Illuminated toggle switch for clockwise/anti-clockwise rotation
- Toggle switch for external control 0 -10 V or 4 – 20 mA
- Compact casing made of powder-coated steel sheet (black)
- Control panel and base plate made of anodised aluminium (silver-coloured)
- Six-roller pump head
- Low-pulsation performance
- Easy tube change
- Long tube life
- Four different cam discs available
- Pump head with three settings for different contact pressure
- Flow rate of up to 486 ml/min
- Dimensions: approx. L 330 mm x W 300 mm x H 220 mm
- Weight: approx. 9.4 kg
The Pump head
Unlike conventional peristaltic pumps the construction of this pump head is based on a completely different principle. The tubing is not pressed from the inside outwards via the rotor, but gently pressed onto a cam disc from the outside inwards. The contact pressure can be adjusted via a simple lever function at the pump head. The result is a significantly longer durability of the tubing and a consistent, accurately adjustable and reproducible flow rate. Furthermore there is the benefit of a more gentle transfer of the medium than it is with the standard peristaltic pump principle.
| Flow Rate |
||
| Cam Disc | RPM | ml/min |
| 1.6 ID x 1.6 WS | 20 150 300 |
4.60 30.40 59.20 |
| 3.2 ID x 1.6 WS | 20 150 300 |
16.20 117.00 230.80 |
| 4.8 ID x 1.6 WS | 20 150 300 |
33.20 201.30 386.40 |
| 6.4 ID x 1.6 WS | 20 150 300 |
36.60 238.80 486.00 |
(measured using water, pressureless, at room temperature with the tube being flexed beforehand)
Lagopredos ® TP 1000 V – Complete Version
- Pumping mode with variable transfer speed
- Standard version with stepper motor of up to 300 rpm
- Stepper motor of up to 400 rpm on request
- Timer mode with programmable dosage volume and individually specified cycle times and pause intervals
- Trigger mode with programmable quantity and speed through external trigger signal such as foot switch, for example
- Regardless of the tubing properties we can offer a calibration function for every transferred medium if required
- Pump parameters
- Pre-setting of direction
- Input of different tube diameters
- Prevent dripping by entering a “drop-stop” time - External control 0 – 10 V or 4-20 mA
- Parameterisable status and error signals to communicate with higher-level components (e. g. SPC)
- Compact casing made of powder-coated steel sheet (black)
- Control panel and base plate made of anodised aluminium (silver-coloured)
- Pump head with six rollers
- Low-pulsation performance
- Easy tube change
- Long tube life
- Four different cam discs available
- Pump head with three settings for different contact pressure
- Flow rate of up to 486 ml/min
- Dimensions: L 330 mm x W 300 mm x H 220 mm
- Weight: approx. 9.6 kg
The Pump head
Unlike conventional peristaltic pumps the construction of this pump head is based on a completely different principle. The tubing is not pressed from the inside outwards via the rotor, but gently pressed onto a cam disc from the outside inwards. The contact pressure can be adjusted via a simple lever function at the pump head. The result is a significantly longer durability of the tubing and a consistent, accurately adjustable and reproducible flow rate. Furthermore there is the benefit of a more gentle transfer of the medium than it is with the standard peristaltic pump principle.
| Flow Rate |
||
|
Cam disc |
RPM | ml/min |
| 1.6 ID x 1.6 WS | 20 150 300 |
4.60 30.40 59.20 |
| 3.2 ID x 1.6 WS | 20 150 300 |
16.20 117.00 230.80 |
| 4.8 ID x 1.6 WS | 20 150 300 |
33.20 201.30 386.40 |
| 6.4 ID x 1.6 WS | 20 150 300 |
36.60 238.80 486.00 |
(measured using water, pressureless, at room temperature with the tube being flexed beforehand)
Lagopredos® TP 2020 E – Economic
- Speed setting via potentiometer
- Standard version with stepper motor
- Illuminated toggle switch for clockwise/anti-clockwise rotation
- Toggle switch for external control 0 – 10 V or 4 – 20 mA
- Compact casing made of powder-coated steel sheet (black)
- Control panel and base plate made of anodized aluminium (silver-coloured)
- Pump with three-roller-rotor
- Four-roller-rotor on request
- Tubing with the following internal diameters can be used: 3.2 mm, 4.8 mm, 6.4 mm or 8.0 mm
- Standard version designed for a wall size of 1.6 mm (2.4 mm also available)
- Easy tube change
- Endless tubing
- Flow rate of up to 1,592 ml/min
- Dimensions: approx. L 330 mm x W 280 mm x H 220 mm
- Weight: 7.15 kg
The Pump Head
The tube can be easily replaced by operating the locking lever which will make the upper half of the pump head move upward and expose the tubing which can then be replaced.
| Flow Rate 3- Roller-Rotor |
||
| Tube (mm) | RPM | ml/min |
| 3.2 ID x 1.6 WS | 30 150 300 |
32 162 346 |
| 4.8 ID x 1.6 WS | 30 150 300 |
67 334 712 |
| 6.4 ID x 1.6 WS | 30 150 300 |
105 544 1,088 |
| 8.0 ID x 1.6 WS | 30 150 300 |
132 719 1,592 |
(measured using water, pressureless, at room temperature with the tube being flexed beforehand)
Lagopredos® TP 2020 V – Complete Version
- Pumping mode with variable transfer speed
- With stepper motor
- Timer mode with programmable dosage volume and individually specified cycle times and pause intervals
- Trigger mode with programmable quantity and speed through external trigger signal such as foot switch, for example.
- Regardless of the tubing properties we can offer a calibration function for every transferred medium if required
- Pump parameters
- Pre-setting of direction
- Input of different tube diameters
- Prevent dripping by entering a “drop-stop” time. - External control 0 – 10 V or 4 – 20 mA
- Parameterisable status and error signals to communicate with higher-level components (e. g. SPC)
- Compact casing made of powder-coated steel sheet (black)
- Control panel and base plate made of anodized aluminium (silver-coloured)
- Pump fitted with three-roller-rotor
- Four-roller-rotors available on request
- Tubing with the following internal diameters can be used: 3.2 mm, 4.8 mm, 6.4 mm or 8.0 mm
- Standard version designed for all wall size of 1.6 mm (2.4 mm also available)
- Easy tube change
- Endless tubing
- Flow rate of up to 1,592 ml/min
- Dimensions: L 330 mm x W 280 mm x H 220 mm
- Weight: approx. 7.2 kg
The Pump Head
The tube can be easily replaced by operating the locking lever which makes the upper half of the pump head move upward and expose the tubing which can then be replaced.
| Flow Rate 3- Roller-Rotor |
||
| Tube (mm) | RPM | ml/min |
| 3.2 ID x 1.6 WS | 30 150 300 |
32 162 346 |
| 4.8 ID x 1.6 WS | 30 150 300 |
67 334 712 |
| 6.4 ID x 1.6 WS | 30 150 300 |
105 544 1,088 |
| 8.0 ID x 1.6 WS | 30 150 300 |
132 719 1,592 |
(measured using water, pressureless, at room temperature with the tube being flexed beforehand)
Lagopredos® TP 4000 E – Economic
- Speed setting via potentiometer
- Standard version with stepper motor up to 300 rpm
- Illuminated toggle switch for clockwise/anti-clockwise rotation
- Toggle switch for external control 0 – 10 V or 4 – 20 mA
- Compact casing made of powder-coated steel sheet (black)
- Control panel and base plate made of anodized aluminium (silver-coloured)
- Pump with two-roller-rotor
- Tubing with three different internal diameters can be used (6.4 mm, 8.0 mm or 9.5 mm)
- Two rotors available (standard version with WS 2.4 mm, also available with WS 3.2 mm)
- Easy tube replacement
- Endless tubing or assembled tubing can be fitted.
- Flow rate of up to 3,680 ml/min
- Dimensions: approx. L 330 mm x W 260 mm x H 220 mm
- Weight: approx. 7.5 kg
The Pump Head
Compact design with clip to easily open and close the pump cover. The modular design of the tube clips allows for easy changeover to other tube dimensions.
| Flow Rate |
||
| Tube (mm) | RPM | ml/min |
| 6.4 ID x 2.4 WS | 30 150 300 |
194 990 1.995 |
| 8.0 ID x 2.4 WS | 30 150 300 |
303 1,610 3,142 |
| 9.5 ID x 2.4 WS | 30 150 300 |
366 1,858 3,680 |
(measured using water, pressureless, at room temperature with the tube being flexed beforehand)
Lagopredos® TP 4000 V – Complete Version
- Pumping mode with variable transfer speed
- Standard version with stepper motor of up to 300 rpm
- Timer mode with programmable dosage volume and individually specified cycle times and pause intervals
- Trigger mode with programmable quantity and speed through external trigger signal such as a foot switch, for example
- Regardless of the tubing properties we can offer a calibration function for every transferred medium if required.
- Pump parameters
- Pre-setting of direction
- Input of different tube diameters
- Prevent dripping by entering a “drop-stop” time. - External control 0 – 10 V or 4 – 20 mA
- Parameterisable status and fault signals to communicate with higher-level components (e. g. SPC)
- Compact casing made of powder-coated steel sheet (black)
- Control panel and base plate made of anodized aluminium (silver-coloured)
- Pump fitted with two-roller-rotor
- Tubing with the following internal diameters can be used: 6.4 mm, 8.0 mm or 9.5 mm
- Two rotors available (standard version with wall size 2.4 mm, also available 3.2 mm)
- Easy tube change
- Endless tubing or assembled tubing can be fitted.
- Flow rate of up to 3,680 ml/min
- Dimensions: approx. L 330 mm x W 260 mm x H 220 mm
- Weight: approx. 7.75 kg
The Pump Head
Compact design with clip to easily open and close the pump cover. The modular design of the tube clips allows for easy changeover to other tube dimensions.
| Flow Rate |
||
| Tube (mm) | RPM | ml/min |
| 6.4 ID x 2.4 WS | 30 150 300 |
194 990 1,995 |
| 8.0 ID x 2.4 WS | 30 150 300 |
303 1,610 3,142 |
| 9.5 ID x 2.4 WS | 30 150 300 |
366 1,858 3,680 |
TP S - 50 E
Flexible pump of compact construction.
- High accuracy, 3-roller configuration
- Easy tube replacement
- Tube length adjustable
- Flow rates of up to 180 ml/min
- 2 flow directions
- Low voltage 12 V DC
- No lubrication necessary
- Low maintenance
- Speed setting via potentiometer
- Easy-to-handle design
- Available with foot switch
- Weight: 350 g
TP S – 50 V
With dispenser system and programmable electronics
- High accuracy, 3-roller configuration
- Easy tube replacement
- Flow rates of up to 70 ml/min
- Repeatability: 0.8 % at 500 µL
- Automatic timer: 1 – 99 fillings
- Maximum pause interval: 1 – 99 seconds
- Tube materials: Lagoprene™ or Silicone
- Filling and extraction
- Repeatable filling mode
- Low voltage 12 V DC
- Adjustable
- Easy-to-handle design
- Foot switch available
- Available with mounting bracket or stand
- Weight: 265 g
The TP S – 50 V was developed for scientific applications requiring flexible usage and accuracy. It allows precise quantities to be dispensed from a liquid container straight into your application. Unused reagents remaining in the tube can be transferred back into the liquid container.
Manual control via a membrane key pad with 9 keys. All data displayed.
NEW
Our TP series peristaltic pumps with manual and automatic controls.
The TP cased peristaltic pump series as well as our new 4.0 Lagopredos® generation with a single-channel pump head are available with a large selection of tube materials and tube sizes to meet the needs of your dosage application. They are characterized by their outstanding versatility, being able to be adapted to varying transfer requirements. You can select between manually or automatically controlled pumps, all of which allow the tubing to be easily changed. You can also use endless tubing which may be appropriate in the food industry and medical technology, for instance.