Menu

Filling with Programmable Dosing Pump TP 4000 V for Flow Rates not Exceeding 3.5 l/min

Filling with Programmable Dosing Pump TP 4000 V for Flow Rates not Exceeding 3.5 l/min

The TP 4000 V model is menu-driven through a membrane keypad with 11 buttons. LED-display with 2 x 16 symbols. Three standard operating languages (German, English and French) are available, any others on request.

Benefits

  • Easy operation
  • Pumping mode with variable transfer speed
  • Timer mode with programmable dosage volume, individually specified cycle times and pause intervals
  • Trigger mode with programmable quantity and speed through external trigger signal such as foot switch
  • Remote control
    • RS-232 interface (e. g. PC)
    • Proportional voltage or current control (0-10V DC or 4-20 mA current loop)
  • Regardless of the tubing properties, we offer a calibration function for every transferred medium if required
  • Pump parameters
    • Setting of direction
    • Input of different tube diameters
    • Prevent dripping by entering a “drop-stop” time
  • Compact casing (top cover made of stainless steel)
  • Easy tube change
  • Dimensions: W 335 mmm x H 210 mm x D 240 mm
  • Weight: 7.3 kg

 

Flow Rate

Tube Dimensions (mm)

Speed  ml/min.
6.4 ID x 2.4 WS  5 %
50 %
100 %
739
1323
2068
8.0 ID x 2.4 WS  5 %
50 %
100 %
960
1739
2684
9.5 ID x 3.2 WS  5 %
50 %
100 %
226
2240
3492

Note:
The above mentioned quantities were measured using water at room temperature. Suction and pressure lines of 1 metre length each. The silicone tubing that was used was flexed beforehand for approx. 30 minutes at 100% rpm. Other tubing material and any possible tolerances with the dimensions result in other measurements.